New Rock Technologies HX4E - Foip

MX Series Voice Gateway User Manual
New Rock Technologies, Inc. 33
Name
Description
Wildcard
Select whether a wildcard with prefix is allowed when a gateway registers to the proxy
server. The default value is “Not allowed”.
Partially allowed: gateways will use a wildcard with fixed prefix (e.g. aaln / *) when
registering. For example, when configuring telephone numbers, if line 1 is set to aaln/1,
line 2 is set to aaln/2 and line 3 is set to aaln/3, the gateways will register to the call
agent in aaln/* without the need of registering the lines individually.
Allowed: the gateways will use a wildcard in registering without prefix.
CR for End-of-Line
Select whether CR is used as the end of line in the MGCP messages. Default not
selected.
Quarantine default to loop
Select the Quarantine handle of gateways making a request to the outside. Default not
selected.
Selected: quarantine using loop mode, the gateways will continually notify all events as
requested after receiving a request.
Enable first digit timer
Select the processing mode when there is no timeout parameter in the outside request
received by the gateways. Default not selected.
Selected: the gateways will report timeout in terms of its own timeout setting (the time
interval set in non-dial timeout of configuration system parameters) when subscribers
has not dialed up in time after offhook.
Using configured digit map
Select whether to activate the digit map configured by local gateway. Default not
selected.
Using notify instead of
401/402
Set whether the gateways report “offhook events” to replace 401 messages in NTFY or
report “on-hook events” to replace 402 messages in NTFY when responding to messages
sent by the proxy server. Default not selected.
Selected: the gateways will use NTFY messages to replace 401 and 402 messages.
No name in default package
Select if a package name is included when the gateways reply to the default package.
Default not selected.
Keep connection when on-
hook
Select if the gateways actively cancel connection disconnect when subscribers hook on.
Default not selected.
2.3.8 FoIP
After login, click Basic > FoIP to open this interface.