Nice Robus RBS400 - EPMOB Photocells and ELMM Courtesy Light

ENGLISH – 51
10.4.1 EPMOB PHOTOCELLS AND ELMM COURTESY LIGHT
m
ROBUS 600 HS is supplied without the mounting brack-
ets for the accessories. Kit RBSKITSAFE1 includes the
brackets and courtesy light ELMM.
m
Alternatively to the EPMOB photocells it is possible to in-
stall the EPMOR reex photocells.
m
Also refer to the manual of the accessories provided.
To mount the accessories:
1. open the locking hook (A) using the key provided
2. loosen the screws (B)
3. remove the cover (C) (“Figure 74")
A
B
C
74
4. insert the bracket (D) into the pins (E) (“Figure 75")
D
E
75
m
The installation of the EPMOR photocell is illustrated be-
low. For further information, also refer to the manual sup-
plied with photocell itself.
m
The procedure described also applies to the installation
of the EPMOB photocell.
5. remove the covers (F) by loosening the screws (G) (“Figure 76")
F
G
76
6. remove the photocell (H) by loosening the screw (I) and removing
the nut (L) (“Figure 77")
H
I
L
77