ENGLISH – 59
&
&
Manually unlocking and locking the gearmotor
The gearmotor is equipped with a mechanical unlocking system that al
-
lows for opening and closing the gate manually.
These manual operations should only be performed in case of a power
outage, malfunctions or during the installation phases.
To unlock the device:
1. Open the locking hook (A) using the key provided (“Figure 85")
A
85
2. At this point, the automation can be moved manually to the desired
position.
To lock the gate, close the locking hook, turn the key anti-clockwise and
remove it.
86
To Next Page
Loading...
