Nokia 7210 - Page 102

File System Management
102
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
3.3.2.1.1 File System Commands
shutdown
Syntax [no] shutdown [cflash-id]
Context file
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command disables the drive. This command is available for use only with removable
storage drives. The removable storage drives differ among the 7210 SAS platforms. It cannot
be used with the internal non-removable compact flash.
The no form of this command enables the drive.
Default no shutdown
Parameters cflash-id — Specifies the device identifier.
Values uf1: (7210 SAS-M)
cf1:, cf2:, uf1: (7210 SAS-T, 7210 SAS-Sx/S 1/10GE: standalone
and standalone-VC, 7210 SAS-Sx 10/100GE, and 7210 SAS-Mxp)
cf2:, cf2-A:, cf2-B:, uf1:, uf1-A:, uf1-B: (7210 SAS-R6 and
7210 SAS-R12)
cf1:, cf2: (7210 SAS-Sx/S 1/10GE: standalone and standalone-VC)
3.3.2.1.2 File Commands
attrib
Syntax attrib [+r | -r] file-url
attrib
Context file
Platforms Supported on all 7210 SAS platforms as described in this document, including those
operating in access-uplink mode
Description This command sets or resets the read-only attribute for a file in the local file system. To list
all files and their current attributes enter attrib or attrib x where x is either the filename or a
wild-card (*).