Nokia 7210 - Page 173

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
Boot Options
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
173
• 7210 SAS-S 1/10GE 48F 4SFP+ AC
• 7210 SAS-S 1/10GE 48F 4SFP+ DC
• 7210 SAS-S 1/10GE 24F 4SFP+ AC
• 7210 SAS-S 1/10GE 24F 4SFP+ DC
• 7210 SAS-S 1/10GE 48T 4SFP+ AC
• 7210 SAS-S 1/10GE 48T 4SFP+ DC
• 7210 SAS-S 1/10GE 24T 4SFP+ AC
• 7210 SAS-S 1/10GE 24T 4SFP+ DC
• 7210 SAS-S 1/10GE 48Tp 4SFP+ AC PoE
• 7210 SAS-S 1/10GE 24Tp 4SFP+ AC PoE
The variants are 1RU platforms, supporting line-rate switching on all the ports, with
a single AC or DC integrated power supply and an option for redundant hot-
swappable power supplies. They also provide a console port and OOB Ethernet
management interface. The user has the option to use either 48-port or 24-port fiber
or copper variants. All the variants support 4 x 10GE SFP+ ports.
The 7210 SAS-S 1/10GE 48Tp 4SFP+ AC PoE and 7210 SAS-S 1/10GE 24Tp
4SFP+ AC POE allow for 48 10/100/1000Mbps copper ports and 24 10/100/
1000Mbps copper ports respectively, along with option to use PoE/PoE+, with a
maximum of 720W of power being available to PoE devices across all the ports.
The following variants support the use of a 1GE fiber-optic SFP in a 10GE SFP+ port:
• 7210 SAS-S 1/10GE 48T 4SFP+ AC
• 7210 SAS-S 1/10GE 48T 4SFP+ DC
• 7210 SAS-S 1/10GE 24T 4SFP+ AC
• 7210 SAS-S 1/10GE 24T 4SFP+ DC
With this functionality, operators can use either 1GE or 10GE fiber uplinks. This
enhancement provides the flexibility of using SFP+ ports as 1GE uplinks with the
capability to move to 10GE uplinks as bandwidth demands grow. This functionality is
supported for standalone mode only.
For a list of SFPs supported for 1GE operation, contact your Nokia representative.