Nokia 7210 - Page 336

System Management
336
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
Use the following CLI syntax to configure the type of schedule to run.
CLI Syntax: config>system>cron
schedule schedule-name [owner schedule-owner]
action action-name [owner owner-name]
count number
day-of-month {day-number [..day-number]|all}
description description-string
end-time [date | day-name] time
hour {hour-number [..hour-number] | all}
interval seconds
minute {minute-number [..minute-number]|all}
month {month-number [..month-number]|month-name
[..month-name]|all}
no shutdown
type {periodic|calendar|oneshot}
weekday {weekday-number [..weekday-number]|day-name
[..day-name]|all}
shutdown
The following example shows the command usage to configure the type of schedule
to run.
Example: config>system>cron# schedule test2
config>system>cron>sched# day-of-month 17
config>system>cron>sched# end-time 2007/07/17 12:00
config>system>cron>sched# minute 0 15 30 45
config>system>cron>sched# weekday friday
config>system>cron>sched# shut
The following is sample configuration output that schedules a script named “test2” to
run every 15 minutes on the 17th of each month and every Friday until noon on July
17, 2007.
*A:SR-3>config>system>cron# info
----------------------------------------------
schedule "test2"
shutdown
day-of-month 17
minute 0 15 30 45
weekday friday
end-time 2007/07/17 12:00
exit
----------------------------------------------
*A:SR-3>config>system>cron#