System Management
452
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
Parameters start-time-of-day — Specifies the starting time for the time range.
Values start-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
end-time-of-day — Specifies the ending time for the time range.
Values end-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
weekend
Syntax weekend start start-time-of-day end end-time-of-day
no weekend start
Context config>system>cron>time-range
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command configures a time interval for every weekend day in the time range.
The resolution must be at least one minute apart; for example, start at 11:00 and end at 11:01.
An 11:00 start and end time is invalid. This example configures a start at 11:00 and an end
at 11:01 on both Saturday and Sunday.
The no form of this command removes the weekend parameters from the configuration.
Parameters start-time-of-day — Specifies the starting time for the time range.
Values start-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
end-time-of-day — Specifies the ending time for the time range.
Values end-time-of-day — hh:mm
hh — 0 to 23
mm — 0 to 59
weekly
Syntax weekly start start-time-in-week end end-time-in-week
no weekly start
Context config>system>cron>time-range
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
To Next Page
Loading...
