Nokia 7210 - Page 454

System Management
454
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
egress
Syntax egress
Context config>system>cron>tod-suite
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command enables the TOD suite egress parameters.
ingress
Syntax ingress
Context config>system>cron>tod-suite
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command enables the TOD suite ingress parameters.
filter
Syntax filter ipip-filter-id [time-range time-range-name] [priority priority]
no filter ip ip-filter-id [time-range time-range-name]
filter ipv6ipv6-filter-id [time-range time-range-name] [priority priority]
no filter ipv6 ipv6-filter-id [time-range time-range-name]
filter macmac-filter-id [time-range time-range-name] [priority priority]
no filter mac mac-filter-id [time-range time-range-name]
Context config>system>cron>tod-suite>egress
config>system>cron>tod-suite>ingress
Platforms Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command creates time-range based associations of previously created filter policies.
Multiple policies may be included and each must be assigned a different priority; in case time-
ranges overlap, the priority will be used to determine the prevailing policy. Only a single
reference to a policy may be included without a time-range.
Parameters ip-filter ip-filter-id — Specifies an IP filter for this tod-suite.
Values 1 to 65535
ipv6-filter ip-filter-id — Specifies an IPv6 filter for this tod-suite.
Values 1 to 65535