Nokia 7210 - Page 505

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
505
Context config>system>lldp>lldp-med>network-policy
Platforms 7210 SAS-Sx/S 1/10GE: standalone and standalone-VC
Description This command configures the application type for the specified network policy.
The configured application-type is used to match with the application type received from an
LLDP-MED endpoint device and provides the endpoint device with the network policy
configured for the requested application type.
The no form of this command configures the Network Policy TLV to send the application type
value “not_specified” to the LLDP-MED endpoint device.
Default no application-type
Parameters voice — Keyword to configure the voice application type for the network policy.
voice-signaling — Keyword to configure the voice signaling application type for the
network policy.
guest-voice — Keyword to configure the guest voice application type for the network
policy.
guest-voice-signaling — Keyword to configure the guest voice signaling application
type for the network policy.
soft-phone-voice — Keyword to configure the soft phone voice application type for the
network policy.
video-conferencing — Keyword to configure the video conferencing application type for
the network policy.
streaming-video — Keyword to configure the video streaming application type for the
network policy.
video-signaling — Keyword to configure the video signaling application type for the
network policy.
dot1p
Syntax dot1p dot1p-value
no dot1p
Context config>system>lldp>lldp-med>network-policy
Platforms 7210 SAS-Sx/S 1/10GE: standalone and standalone-VC
Description This command configures the dot1p value for the network policy.
The no form of this command reverts to the default value.
Default dot1p 0