EasyManua.ls Logo

Nokia 7210 - Page 538

Nokia 7210
750 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System Management
538
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
© 2021 Nokia.
Use subject to Terms available at: www.nokia.com
3HE 17358 AAAB TQZZA
Note:
1. The maximum value is 9 if acl-sap-ingress is configured as 9.
ip-dscp-port-if-match-enable
Syntax ip-dscp-port-if-match-enable num-resources
no ip-dscp-port-if-match-enable
Context configure>system>resource-profile>ingress-internal-tcam>qos-sap-ingress-resource
Platforms 7210 SAS-Mxp, 7210 SAS-R6 and 7210 SAS-R12
Description This command allocates resources for use by SAP ingress QoS policies that use IP DSCP
table-based classification.
The available resources are used by software to allocate policers for SAPs whose ingress
policy uses the IP DSCP table-based classification policy. The users need to allocate
resources from the ingress internal TCAM pool before DSCP classification can be used. This
means users need to take away resources from other features such as mac-match criteria
from the SAP ingress classification or ACL ingress to allocate resources for DSCP
classification.
Refer to the 7210 SAS-M, T, R6, R12, Mxp, Sx, S Quality of Service Guide for more
information on resource allocation and fields available for use.
The no form of this command does not allocate any resources for use by SAP ingress QoS
policies using a DSCP table-based classification policy. If no resources are allocated for use,
the software fails all attempts to associate a service entity (for example, SAP and IP interface)
with a SAP ingress QoS policy using the DSCP table-based classification policy.
Parameters num-resources — Specifies the maximum amount of resources (slices) for use by the
DSCP table-based classification policy. Each slice has a fixed number of entries.
DSCP table-based classification requires exclusive use of the allocated resources.
7210 SAS-S 1/10GE (per node) (standalone) 0 6 max
7210 SAS-S 1/10GE (standalone-VC) 0 5 max
7210 SAS-Sx 10/100GE (per node) 0 4 max
Table 51 Number of Resources Available for IPv4-IPv6-128-Match-Enable
(Continued)
Platforms Min value
(per node)
Max value
(per node)
Default
Values

Table of Contents

Other manuals for Nokia 7210

Related product manuals