7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
555
The no form of this command reverts to the default value.
Default qos-access-port-ingress-resource 0
Parameters num-resources — Specifies the amount of resources allocated to QoS access port
ingress policies.
Values Table 60 lists the number of resources that can be allocated to QoS
access port ingress policies per 7210 SAS platform.
qos-network-ingress-resource
Syntax qos-network-ingress-resource num-resources
no qos-network-ingress-resource
Context config>system>res-prof>ing-internal-tcam
Platforms 7210 SAS-R6 and 7210 SAS-R12
Description This command removes resources allocated to port-based and IP interface-based network
ingress QoS policies associated with network and hybrid ports, and makes the resources
available for other features that share the ingress-internal-tcam resource pool (for example,
SAP ingress classification and ingress ACLs).
Note: On the 7210 SAS-Sx 10/100GE, the sum of resources, also called slices, allocated
to SAP ingress policies using the config>system>resource-profile>ingress-internal-
tcam>qos-sap-ingress-resource command and to access ingress policies using the
config>system>resource-profile>ingress-internal-tcam>qos-access-port-ingress-
resource command must not exceed 3.
Table 60 Number of Resources Allocated to QoS Access Port Ingress
Policies on 7210 SAS Platforms
7210 SAS Platform Number of Resources
7210 SAS-Mxp 0 to 4
7210 SAS-R6 IMM-b 0 to 3
7210 SAS-R6 IMM-c 0 to 1
7210 SAS-R12 0 to 3
7210 SAS-Sx/S 1/10GE 0 to 7
7210 SAS-Sx 10/100GE 0 to 2
To Next Page
Loading...
