Nokia 7210 - Page 667

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
667
For a virtual chassis (VC), this command displays information about the entire VC. Hardware
information can be displayed for individual CPMs, IMMs, power supplies, and fans.
Parameters environment — Displays chassis environmental status information.
Default all chassis information
power-supply — Displays only power-supply information.
Output The following outputs are examples of chassis information, and Table 93 describes the output
fields.
• Sample Output for 7210 SAS-M
• Sample Output for 7210 SAS-T
• Sample Output for 7210 SAS-Sx/S 1/10GE
• Sample Output for 7210 SAS-Sx 10/100GE
• Sample Output for 7210 SAS-Sx 1/10GE with RPS
• Sample Output for a 7210 SAS Virtual Chassis
• Sample Output for 7210 SAS-Sx/S 1/10GE in Standalone VC Mode
Sample Output for 7210 SAS-M
A:7210-SAS-M# show chassis power-supply
===============================================================================
Chassis Information
===============================================================================
Power Supply Information
Number of power supplies : 2
Power supply number : 1
Configured power supply type : ac single
Status : up
AC power : within range
Power supply number : 2
Configured power supply type : dc (+24V)
Status : not equipped
===============================================================================
A:7210-SAS-M#
A:7210-SAS-M# show chassis power-supply
===============================================================================
Chassis Information
===============================================================================
Power Supply Information
Number of power supplies : 2
Power supply number : 1
Configured power supply type : dc (+24V)
Status : up
DC power : within range
Input power : within range
Output power : within range