Nokia 7210 - Page 675

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
3HE 17358 AAAB TQZZA © 2021 Nokia.
Use subject to Terms available at: www.nokia.com
675
*A:7210-2# show alarm-contact-input all
===============================================================================
Alarm Contact Input
===============================================================================
Alarm Input Pin Number : 1
Alarm Input Pin Description :
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used : Major
Last State Change : 05/19/2010 11:28:09
Alarm Input Pin Number : 2
Alarm Input Pin Description :
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used : Major
Last State Change : 05/19/2010 11:28:09
Alarm Input Pin Number : 3
Alarm Input Pin Description :
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used : Major
Last State Change : 05/19/2010 11:28:09
Alarm Input Pin Number : 4
Alarm Input Pin Description :
Alarm Input Pin Current State : Disabled
Alarm Output Pin Used : Major
Last State Change : 05/19/2010 11:28:09
===============================================================================
*A:7210-2#
pools
Syntax pools
Context show
Platforms Supported on all 7210 SAS platforms as described in this document
Description This command displays information on the buffer allocation and buffer usage per port.
Output The following output is an example of pools information, and Table 95 describes the output
fields.
Table 94 Output Fields: Alarm Contact Input
Label Description
Alarm input pin Number Indicates the pin alarm input pin number
Alarm input pin Description Describes the alarm indicating its usage or attribute
Alarm input pin current state Indicates the current state of the alarm contact input pin
Alarm output pin used Indicates the alarm output pin used
Last state change time Indicates the previous state change time