Figure 27 CW Test window
Quick Test window
Because the
Quick Test
runs the
Receiver Self Test
before the
Oscillator Test
, it may cause a timeout on the
Oscillator Test
. It does not necessarily mean that Oscillator Test has failed, but carrying out the Oscillator
Test (page 3–46), Receiver Self Test (page 3–47) and CW Test (page 3–48) individually will give more valid
results.
RM-356
BB Troubleshooting and Manual Tuning Guide
Issue 1 COMPANY CONFIDENTIAL Page 3 –49
Copyright © 2008 Nokia. All rights reserved.
To Next Page
Loading...
