ST-61 Rework stencil
ST-61 is a rework stencil used when servicing the microphone (B2170).
It is used together with the rework jig RJ-184.
ST-65 Rework stencil
ST-65 is a rework stencil used when servicing the GSM 850/900 TX filter
(Z7503).
This stencil is used together with the rework jig RJ-201.
General tools
The table below gives a short overview of service devices that can be used for testing, error analysis, and
repair of product RM-356. For the correct use of the service devices, and the best effort of workbench setup,
please refer to various concepts.
AC-33 Power supply
Universal power supply for FPS-10; included in the FPS-10 sales
package.
AC-35 Power supply
Universal power supply for FPS-21; included in the FPS-21 sales
package.
Input 100V…230V 50Hz…60Hz, output voltage of 12 V and output
current up to 3 A.
RM-356
Service Tools and Service Concepts
Page 2 –10 COMPANY CONFIDENTIAL Issue 1
Copyright © 2008 Nokia. All rights reserved.
To Next Page
Loading...
