Steps
1. Place the phone in the flash adapter.
2. Start Phoenix service software.
3. Choose File → Scan Product.
4. Choose Testing → Bluetooth LOCALS
5. Locate the BT-box serial number (12 digits) found in the type label on the back of the JBT-3, JBT-6, JBT-9,
or SB-6 Bluetooth test box.
6. In the Bluetooth LOCALS window, write the 12-digit serial number on the Counterpart BT Device
Address line.
7. Place the BT-box near (within 10 cm) of the phone and click Run BER Test.
RM-356
BB Troubleshooting and Manual Tuning Guide
Page 3 –56 COMPANY CONFIDENTIAL Issue 1
Copyright © 2008 Nokia. All rights reserved.
To Next Page
Loading...
