POSICON positioning control – Supplementary manual for series SK 200E and SK 250E-FDS
18 BU 0210 en-3117
Pos: 54 /A nl eitu nge n/El ek tro nik/FU u nd S tart er/ 2. M o ntag e un d Ins tall ation/M ont age/FD S [SK x xxE-FDS ]/ Auss tatt ungs var ia nte n_04 _Ko nfig ur ati on d er O pti onspl ätz e der A nst euer ung seb ene _01 [SK 2 xxE-FD S] @ 12\ mod_1467125723781_388.docx @ 334298 @ 5 @ 1
Configuration of option slots on the control level
The option slots M1 to M8 are designed for M12 plug connectors. The configuration of the connections
or functions for the individual option slots which are relevant for the frequency inverter is printed
directly on the option slot.
Option slot Option type
Function Relevant
parameters
Comments
M1 a No option
c has zero track.
Set the function of
the zero track in
P420[-01].
DOUT2 P434[-02]
DIN3 P420[-03]
DIN3 P420[-03]
b Initiator 4 INI4 DIN3 P420[-03] only SK 250E-FDS /
SK 270E-FDS
SK 280E-FDS
b Initiator 5 INI5 AIN1 /
DIN6
P400[-01] /
P420[-06], P113
H1 / H2 only usable
to a limited extent
DIN7
P420[-07], P113
absolute encoder
M8 a No option
DIN7
P420[-07], P113
SK 260E-FDS,
H1 / H2 only usable
to a limited extent
SK 280E-FDS
e AS interface ASI
Encoder cable available on request If the encoder has a zero track, evaluation of the zero track is only via DIN1.
2)
The DC control voltage can also be supplied via M8 c (AUX) or the option slots X1 or Z1 … Z4 of the connection level.