NorthStar 6000i - Setting up the Chart Screen (Gold Charts)

33
Reference section 1 — Using the Chart Screen
Setting up the chart screen (Gold Charts)
Reference Manual Revision D
Depth (low, mid and deep)
The ON setting displays depth contour
lines for low, mid, and deep water areas.
Track line
The ON setting displays your vessel’s track
points (the course you’ve already trav-
eled). For more track display options, see
Changing the track control below.
Waypoints
The ON setting displays your waypoints on
the CHART screen, and the OFF setting
turns them off, with the exception of
waypoints on a displayed route.
Nav aids
The ON setting displays nav aids from the
Navionics chart cartridge, and the OFF
setting hides the nav aids.
Land masses
The ON setting displays the coloring of
land masses to contrast between water and
land. The OFF setting shows only coast-
line, without the coloring.
Setting up the chart screen (Gold Charts)
If you have a Gold Chart cartridge
installed, the CHART SETUP/STATUS screen
• selects the details displayed on the
CHART screen
• customizes the way depths are
displayed
• adjusts the 6000i’s track function
• controls Demo Mode to simulate
navigation and radar.
Press the Chart Setup menu key on the
CHART screen. (Make sure you’re in VESSEL
mode — press the Vessel menu key if
necessasary). Setup options are displayed,
along with the chart cartridge’s name and
date.