75
Reference section 4 — Creating waypoints and routes
Saving a route as you travel
Reference Manual Revision D
2. Press the Save menu key to set up saving
a route automatically.
The SAVE ROUTE screen is displayed,
asking you to enter the name of the new
route to be saved.
If you use the name of any existing route,
waypoints will be added to the end of
that route.
Enter the name of the route to be saved
using the keypad and cursor pad, then
press ENTER twice.
The unit displays the message “saving to
route:” at the bottom of the ROUTES
screen, confirming the name of the route
being saved.
Routes screen Save Route setup screen
To Next Page
