Oceanic VT3 - After the Transition Period

116
Once 10 minutes have elapsed, the Surface Interval time display colon will stop flashing
indicating that the Dive and Transition Period are completed, and a subsequent descent
will be considered a new dive.
AFTER THE TRANSITION PERIOD
Once the Transition Period has ended, you will then have full access to other Modes (e.g.,
GAUG SURF, FREE SURF, PLAN, FLY, SAT, LOG, HISTORY, SET, etc.).
 To activate the SmartGlo Backlight, press the S button.
 To access SURF ALT, PLAN, FLY, etc., press/release the A button as required.
NORM SURF MAIN > GAUG SURF MAIN > FREE SURF MAIN
NORM SURF MAIN > ALT > PLAN > FLY > SAT > LOG > HIST
> The Planning Sequence now displays adjusted No Decompression Limits based on
residual nitrogen and accumulated oxygen calculated to be remaining from the
previous dives.
> The T ime to Desaturate counter provides calculated time for tissue desaturation at sea
level.
> If a Violation occurred during the dive, the SAT screen (Desaturation Time) will not be
displayed.
> After 2 hours on the Surface, FLY > SAT > WET (if the VT3 is wet) alternate.