91
DECOMPRESSION DIVE MODE
The VT3 is designed to help you by providing a representation
of how close you are to entering Decompression.
Decompression Dive Mode activates when theoretical No
Decompression time and depth limits are exceeded.
Upon Entry into Decompression Mode, the Audible Alarm will
sound, the red LED Warning Light will flash, and the graphic
message DECO > STOP will scroll each 3/4 second On and 1/
4 second Off (Fig. 74), until acknowledged or for 10 seconds
(unless set OFF).
Depress the A button for 2 seconds to acknowledge/silence
the Audible Alarm.
> The UP Arrow will flash if you are greater than 10 FT (3 M)
deeper than the Required Stop Depth.
> Once you are within 10 FT (3 M) of, and below, the
Required Stop Depth, the UP Arrow will be removed.
> Once silenced, the graphics DECO > STOP > xxF or xxM
will scroll each 2 seconds On 2 seconds blank.
At any time during the dive -
Depress the S button to activate the Backlight.
Press/release the A button to access Alternate displays.
Fig. 74 - DECO ENTRY
To Next Page
Loading...
Need help?
General
