Oceanic VT3 - Set Conservative Factor

47
SET CONSERVATIVE FACTOR information includes (Fig. 39):
> Graphic CONS
> Set Point ON (or OFF), flashing.
> Symbols TIME and NDC.
 Pressing and releasing the S button (< 2 seconds) will
toggle between ON and OFF.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
BACKLIGHT DURATION screen with the Set Point flashing.
 Pressing and releasing the A button repeatedly (< 2
seconds each) will step through the other SET U screens.
 Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert to the SET U screen.
 Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes operation will revert to
the NORM or GAUG SURF MAIN screen.
NOTE: When the Conservative Factor is set ON,
the No Decompression Limit dive times are re-
duced to values equivalent to those that would
be available at the next higher 3000 foot (915
meter) Altitude. Refer to the tables on Pages
150/151.
Fig. 39 - Set Conservative
Factor