57
SET T GROUP (TIME/DATE)
Set T Sequence:
SET T > Hour Format > Hour > Minute > Year > Month > Day
> The SET T Group can also be set/changed using the PC
Settings Upload program.
> SET T Settings remain at the values set until changed.
> FREE Mode utilizes these settings.
> Day of the Week is set automatically when the Date is set.
Depressing the A and S buttons simultaneously for 8
seconds while the NORM or GAUG SURF MAIN screen is
displayed, will access SET T identified by the graphic SETT
(Fig. 46).
Depressing the M button at any time for 2 seconds and if no
button is pressed during a period of 2 minutes, the unit will
revert to the NORM or GAUG SURF MAIN screen.
Pressing and releasing the A button momentarily (< 2
seconds) while SET T is displayed will advance to SET
HOUR FORMAT with the Set Point flashing.
Fig. 46 - Set T
The YEAR will not be
displayed in any
Mode other than
SET DATE. The
DATE will reset to
1.1 2006 when the
Battery is replaced.
To Next Page
Loading...
