Oceanic VT3 - Set Tlbg (Tissue Loading Bar Graph) Alarm

38
SET TLBG (TISSUE LOADING BAR GRAPH) ALARM
Information includes (Fig. 30):
> Graphic TLBG
> TLBG Set Point (segments), flashing.
 Pressing and releasing the S button momentarily (< 2
seconds) will decrease the Set Point from All 8 segments
(Deco) to 1 in decrements of 1 segment.
 Depressing the S button will scroll through the Set Points at
a rate of 4 Set Points per second until it is released.
 Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
DTR (Dive Time Remaining) ALARM screen with the Set
Point flashing.
 Pressing and releasing the A button repeatedly (< 2
seconds each) will step through the other SET A screens.
 Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert to the SET A screen.
 Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes operation will revert to
the NORM or GAUG SURF MAIN screen.
FREE Mode has a separate TLBG Alarm.
Fig. 30 - Set TLBG Alarm
Setting the TLBG
Alarm to activate
before the VT3 enters
DECO is highly
recommended.