86
NORM NO DECOMPRESSION DIVE MODE
When the Wet Activation feature is set ON, the VT3 will enter the Dive Mode any time you
descend to 5 FT (1.5 M).
When the Wet Activation feature is set OFF, the VT3 will not enter Dive Mode upon
descent unless it is first Activated by push button and operating in one of the Dive Com-
puter modes (menus) at that time, a mode such as Surface, Fly, Log, etc.
At any time during the dive -
Press the S button to activate the SmartGlo Backlight.
Depress the A button for 2 seconds to acknowledge and
silence Alarms.
NORM DIVE NO DECO MAIN Display (Default),
information provided includes (Fig. 69) -
> TLBG representing Nitrogen Loading
> VARI while ascending
> O2BG, if any during Nitrox dives
> Tank Pressure with the PSI (or BAR) icon, if a TMT is active
and linked, flashing after 1 minute of Lost Link
> EDT (hr:min) with symbols DIVE and TIME
> DTR (hr:min) with symbols TIME and NDC (or O2 or AIR)
> ATR (decrements of 10 min), if =< 60 min
> Tank icon representing the GAS selected (1, 2, or 3)
> Symbol NITROX, if FO2 set for Nitrox
> Current Depth with symbol FT (or M)
Fig. 69 - NORM DIVE NO
DECO MAIN
ABBREVIATIONS USED
TLBG = TISSUE LOADING
BAR GRAPH
O2BG = OXYGEN ACCUMULA-
TION BAR GRAPH
VARI = VARIABLE ASCENT
RATE INDICATOR
DTR = DIVE TIME REMAINING
ATR = AIR TIME REMAINING
To Next Page
Loading...
Need help?
General
