Oceanic VT3 - Set Hour Format

58
SET HOUR FORMAT information includes (Fig. 47):
> Graphic HOUR
> Set Point 12 (or 24), flashing.
> Symbol TIME.
 Pressing and releasing the S button momentarily (< 2
seconds) will toggle between 12 and 24.
 Pressing the A button momentarily (< 2 seconds) will save
the Hour Format Set Point and access the SET TIME screen
with the HOUR Set Point flashing (Fig. 48).
 HINT - Pressing the A button repeatedly (< 2 seconds each)
will step through the T ime/Date Settings, bypassing those
that don't require setting.
SET TIME (Hour and Minute)
The graphic Am or Pm will be displayed when 12 Hour Format
has been selected.
 Depressing the S button while the HOUR Set Point is
flashing will scroll through the Set Points in 1 Hour
increments at a rate of 4 per second from 12: Am to 11:
Pm (or 0: to 23: if set for 24 Hour Format).
 Pressing and releasing the A button momentarily (< 2
seconds) will save the Hour Set Point and/or advance to
SET MINUTE with the MINUTE Set Point flashing.
Fig. 47 - Set Hour Format
Fig. 48 - Set Time