Oceanic VT3 - SET UNITS OF MEASURE

45
SET UNITS information includes (Fig. 37):
> Graphic UNIT
> Set Point symbols/graphics PSI, F, and FT (or BAR, C, and
M), flashing.
 Pressing and releasing the S button will toggle between
Imperial (F, FT, PSI) and Metric (C, M, BAR).
 Pressing and releasing the A button momentarily (< 2
seconds) will save the setting and/or advance to the SET
SAFETY STOP screen with the T ime Set Point flashing.
 Pressing and releasing the A button repeatedly (< 2
seconds each) will step through the other SET U screens.
 Depressing the A and S buttons simultaneously for 2
seconds will save the setting and revert to the SET U screen.
 Depressing the M button for 2 seconds or if no button is
pressed for a period of 2 minutes operation will revert to
the NORM or GAUG SURF MAIN screen.
HINT: To change this setting while operating in
FREE Mode, first access the NORM SURF Mode.
Fig. 37 - Set Units