83
CONTROL OF DISPLAYS
During Dive Modes, there is a Main (Default) Display of important information relevant to
the specific mode that the VT3 is operating in (No Deco, Deco, GAUG, FREE, etc.).
Alternate (ALT) Displays can be accessed by pressing and releasing the A button to view
additional information. They will automatically revert to the Main Display after 5 seconds.
MAIN > ALT 1 (Temp/Time) > ALT 2 (EDT/ATR) > ALT 3 (O2 Data, if set for Nitrox)
Alarms can be acknowledged/silenced by pressing the A button for 2 seconds.
The S button is used to activate the SmartGlo Backlight.
The display will be illuminated as long as the button is depressed, plus the Backlight
Duration time that has been set (0, 5, or 10 seconds) for a maximum of 20 seconds
The Backlight will not activate during a Low Battery condition.
When TMT 2-3 USE is set for SELF, the M button is used for viewing Gas Switch Preview
screens (FO2) and Switching Gas. When TMT2-3 USE is set for BUD, the M button is used
for viewing Tank Pressure of 1 or 2 buddies whose TMTs have been coded as the VT3's
BUD 1 (TMT 2) and BUD 2 (TMT 3) settings.
_____________________________________________________________________________
Left/Front - Mode/Mix (M) button
Right/Front - Advance (A) button
Right/Side - Select (S) button
MA
S
To Next Page
Loading...
Need help?
General
