Oceanic VT3 - SET U GROUP (UTILITIES)

43
SET U GROUP (UTILITIES)
Set U Sequence:
SET U > Wet Activation > Units > Safety Stop > Conservative
Factor > Backlight Duration > Sampling Rate > TMT 1 > TMT 2-3
USE > TMT 2 (or BUD 1) > TMT 3 (or BUD 2).
> The SET U Group can also be set/changed using the PC
Settings Upload program.
> SET U Settings remain at the values set until changed.
> FREE Mode utilizes these settings for Wet Activation, Units,
and Backlight Duration. It has a separate Sampling Rate
fixed at a 1 second interval not affected by the SET U
setting.
> Depressing the A and S buttons simultaneously for 6
seconds while the NORM or GAUG SURF MAIN screen is
displayed, will access SET U identified by the graphic SETU
(Fig. 35).
> Pressing and releasing the A button momentarily (< 2
seconds) while SET U is displayed will advance to SET WET
ACTIVATION with the Set Point flashing.
Fig. 35 - SET U (Utilities)
TMT is the abbreviation
used for Transmitter.
BUD is the abbreviation
used for Buddy.