Oceanic VT3 - Page 153

153
NORM/GAUG SET MODES
 Set F Group (FO2 items): > Factory Settings:
 FO2 GAS1 (Air, 21 to 50%) > Air
 FO2 GAS2 (Air, 21 to 100%) > Air
 FO2 GAS3 (Air, 21 to 100%) > Air
 FO2 Default (On/Off) > On
 Set A Group (Alarms):
 Audible Alarm / LED Warning (On/Off) > On
 Max Depth Alarm (30 to 330 FT /10 to 100 M) > 330 FT
 Elapsed Dive Time Alarm (:10 to 3:00 hr:min) > 3:00 (hr:min)
 Max TLBG Alarm (1 to 7 segments) > 5 segments (Deco)
 Dive Time Remaining Alarm (:00 to :20 min) > :20 (min)
 Turn Press Alarm (Off, 1000 to 3000 PSI / 70 to 205 BAR) > Off
 End Press Alarm (300 to 1500 PSI / 20 to 105 BAR) > 300 PSI
 Max PO2 Alarm (1.20 to 1.60 ATA) > 1.60 (ATA)
 Set U Group (Utilities):
 Wet Activation (On/Off) > On
 Units of Measure (Imperial / Metric) > Imperial
 Safety Stop Time, Depth (Off/3/5 minutes, 10/15/20 FT, 3/4/5/6 M) > 3:00 (min:sec)
 Conservative Factor (On/Off) > Off
 Backlight Duration (0/5/10 seconds) > :05 (sec)
 Sampling Rate (2/15/30/60 seconds) > 15 (sec)
 Transmitter 1 Link Code (Off/On, 000000 to 999999) > serial no.
 Transmitter 2-3 Use (Self/Bud) > Self
 Transmitter 2 Link Code (Off/On, 000000 to 999999) > serial no.
 Transmitter 3 Link Code (Off/On, 000000 to 999999) > serial no.
SPECIFICATIONS (CONTINUED)