158
OPERATIONAL PERFORMANCE (continued) -
Battery Indicator:
Warning - icon on solid at 2.75 volts, VT3 Battery change recommended
Alarm - icon on flashing at 2.50 volts, change the VT3 Battery
Activation:
Manual - push button (recommended), required if Wet Activation is set OFF.
Automatic - by immersion in water (if set ON)
Graphic WET indicates Activation Contacts are Wet (unit must be dried prior to transport or storage)
Cannot be manually activated deeper than 4 FT (1.2 M), if Water Activation is set OFF.
Cannot operate at elevations higher than 14,000 feet (4,270 meters)
Operating Temperature:
Out of the water - between 20 °F and 140 °F (-6 and 60 °C).
In the water - between 28 °F and 95 °F (-2 and 35 °C).
At extremely low temperatures, the LCD may become sluggish, but this will not affect it's accuracy. If stored or
transported in extremely low temperature areas (below freezing), you should warm the unit and its battery with
body heat before diving.
Storage Temperature:
Out of the water - between 14 °F and 158 °F (-8 and 70 °C).
SPECIFICATIONS (CONTINUED)
To Next Page
Loading...
