Oceanic VT3 - Page 26

26
NORM SURF MAIN - Button Operations:
 Pressing the S button will activate the Smartglo Backlight.
 Pressing and releasing the A button repeatedly (< 2 seconds each time) will step
through the NORM Surface Sequence -
>> NORM SURF MAIN > NORM SURF ALT > PLAN > FLY > SAT > LOG > HISTORY.
 Depressing both the A and S buttons simultaneously for 2 seconds will access the SET
Menu (F > A > U > T) and a VT3 Serial Number display.
>> SURF MAIN > SET FO2 > SET Alarms > SET Utilities > SET TIME > SN
 Pressing and holding the M button for 2 seconds will access the GAUG SURF MAIN
screen with the graphic GAUG flashing, then another 2 second press will access the
FREE SURF MAIN screen with the graphic FREE flashing.
>> NORM SURF >> GAUG SURF >> FREE SURF
 Pressing and releasing the M button momentarily (< 2 seconds) while GAUG or FREE
is displayed flashing will select that as the Operating Mode as indicated by the
graphic becoming solid.
 When one Mode graphic in the series is solid, it is the 'selected Operating Mode'.
Ensure it is that Mode that you want and will be diving in.
 Depressing the S button for 2 seconds while viewing the NORM SURF screen will
activate the VT3's Receiver and access a series of screens that will indicate the Status
of the Batteries and Pressures of the Tanks in use.