Oceanic VT3 - Page 51

51
 Pressing and releasing the A button (< 2 seconds) will accept the Second Digit of the
Code and/or advance to the Third Digit which will be flashing.
 Pressing and releasing the S button repeatedly (< 2 seconds each) will increase the
Third Digit from 0 to 9 in increments of 1.
 Depressing the S button will scroll through the Set Points at a rate of 4 per second.
 Pressing and releasing the A button (< 2 seconds) will accept the Third Digit of the
Code and/or advance to the Fourth Digit which will be flashing.
 Pressing and releasing the S button repeatedly (< 2 seconds each) will increase the
Fourth Digit from 0 to 9 in increments of 1.
 Depressing the S button will scroll through the Set Points at a rate of 4 per second.
 Pressing and releasing the A button (< 2 seconds) will accept the Fourth Digit of the
Code and/or advance to the Fifth Digit which will be flashing.
 Pressing and releasing the S button repeatedly (< 2 seconds each) will increase the
Fifth Digit from 0 to 9 in increments of 1.
 Depressing the S button will scroll through the Set Points at a rate of 4 per second.
 Pressing and releasing the A button will accept the Fifth Digit of the Code and/or
advance to the Sixth Digit which will be flashing.
 Pressing and releasing the S button repeatedly (< 2 seconds each) will increase the
Sixth Digit from 0 to 9 in increments of 1.
 Depressing the S button will scroll through the Set Points at a rate of 4 per second.
 Pressing and releasing the A button (< 2 seconds) will accept the TMT 1 Link Code
and/or advance to SET TMT 2-3 USE with the Set Point flashing.
 Depressing the A and S buttons simultaneously for 2 seconds will save the setting and
revert back to the SET U screen.