2 – 2
PRINT QUALITY: Selects the quality and print style of the typeface.
CHARACTER PITCH: Selects the size of the printed characters.
PARK: Selects the park position for continuous paper, allowing single sheets to be fed
from the front of the printer.
TEAR: Advances the paper to the tear off position (serrated bar above acoustic cover),
allowing continuous paper to be torn off at random.
MICRO FEED: Advances the paper 1/180 inch in the direction of the arrows for fine
adjustment (up or down).
When pressing the MICRO FEED button (up or down) with the SHIFT button the
insert position for paper is set.
SHIFT button: Expands the facility of the buttons.
QUIET button: Selects the quiet printer mode.
Switch Combinations
The following buttons have special functions when held down during power up:
LF: Activates the print samples self-test.
LF and SEL: Resets the Menu to the factory settings.
QUIET/TOF: Activates the rolling ASCII print self-test.
SEL and FF/LOAD: Puts the printer into the Hex Dump Mode.
FF/LOAD and TEAR: Returns the printer to the default Menu (factory) settings.
This option also sets the insert position for paper to the factory setting.
PARK and QUIET/TOF: This option sets the insert position for paper to the factory
setting.