3 – 39
Your printer is designed to maximise speed by printing alternately from the left and
right (bidirectional printing), rather than moving the printhead back to the left margin
so that each line prints from left to right (unidirectional printing).
Use unidirectional printing when precise vertical alignment from line to line is critical.
You can also select unidirectional printing in Menu Select Mode.
Unidirectional printing Decimal Hex ASCII Comp
Unidirectional printing 27 85 n 1B 55 n ESC U n E P A
n = 1: Begin unidirectional printing n = 0: Begin bidirectional printing
One line unidirect. printing Decimal Hex ASCII Comp
One line unidirect. printing 27 60 1B 3C ESC < E
Epson
This command activates unidirectional printing for one line only.
Epson
Use this command to control the speed of printing. Half speed printing is quieter than
full speed.
Printing speed Decimal Hex ASCII Comp
Printing speed 27 115 n 1B 73 n ESC s n E
n = 1: Begin half speed printing n = 0: Begin full speed printing
Set the MSB to 1 or 0 Decimal Hex ASCII Comp
Set the 8th data bit to 1 27 62 1B 3E ESC > E
Set the 8th data bit to 0 27 61 1B 3D ESC = E
Accept data as is 27 35 1B 23 ESC # E
To Next Page
Loading...
Need help?
General