EasyManua.ls Logo

Oki MICROLINE 591Elite - Page 47

Oki MICROLINE 591Elite
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 – 22
Continuous forms
Single part forms
Weight 45 – 90g/m
2
(12 to 24 lb.)
Thickness 0.051 mm to 0.124 mm (0.0020 inch to 0.0049 inch)
Multipart-carbon lined or
pressure sensitive
Weight 34 – 42g/m
2
(9 to 11lb.)
Number of copies Original plus three copies
Thickness 0.36 mm max. (0.014 inch max.)
Multipart-interleaf
Weight Paper: 38 – 45g/m
2
(10 to 12 lb.)
Carbon: 34g/m
2
(9 lb.)
Number of copies Original plus three copies
Thickness 0.36 mm max. (0.014 inch max.)
0.44 mmMax. (o.017 inch) – bottom feed only.
Cut sheets
Single part
Weight 45 – 90g/m
2
(12 to 24 lb.)
Thickness 0.051 mm to 0.124mm (0.002 inch to 0.0049 inch)
Envelopes (individual)
Weight 90g/m
2
(24 lb.) max.
Thickness 0.406 mm (0.016 inch max.)
Dimensions 165 x 92 mm max. (6.5 inch x 3.625 inch)
225.4 mm x 98.4 mm (8.875 inch x 3.875 inch)
241.3 mm x 104.8 mm (9.5 inch x 4.125 inch)
Card stock
Weight 150g/m
2
(40 lb.) max.
Thickness 0.20 mm (0.008 inch max.)
Dimensions 127 mm x 203 mm max. (5 inch x 8 inch max.)
Note: Use with bottom feed only.
Labels
Carrier 208.3 mm max. (8.20 inch max.) width
Thickness 0.28 mm max. (0.011 inch max.)
Note: Use bottom feed only. Do not use fabric labels. Do not print on the
edge or the perforation of the label.

Table of Contents

Related product manuals