5238-E P-332
SECTION 15 APPENDIX
G36 M-tool spindle - feed axis synchronized feeding (forward) ✩
G37 M-tool spindle - feed axis synchronized feeding (reverse) ✩
G38
G39
G40 Cutter radius compensation: Cancel
G41 Cutter radius compensation: Left
G42 Cutter radius compensation: Right
G43
G44
G45
G46
G47
G48
G49
G50 Zero shift, Maximum spindle speed designation
G51
G52 Turret index position error compensation ✩
G53
G54
G55
G56
G57
G58
G59
G60
G61
G62 Mirror image designation ✩
G63
G64 Droop control OFF
G65 Droop control ON
G66
G67
G68
G69
G70
G71 Compound fixed thread cutting cycle: Longitudinal
G72 Compound fixed thread cutting cycle: Transverse
G73 Longitudinal grooving compound fixed cycle
G74 Transverse grooving compound fixed cycle
G75 Automatic chamfering
G76 Automatic rounding
G77 Tapping compound fixed cycle
G78 Tapping cycle reverse thread
G79
G Code Contents
To Next Page
Loading...