5238-E P-342
SECTION 15 APPENDIX
M210
M211 Keyway cutting cycle: Uni-direction cutting ✩
M212
M-tool spindle on the 3rd turret stop, or
Keyway cutting cycle: Zigzag pattern
✩
M213
M-tool spindle on the 3rd turret stop, or
Keyway cutting cycle: Designated depth infeed
✩
M214
M-tool spindle on the 3rd turret stop, or
Keyway cutting cycle: Equal depth infeed
✩
M215 Load monitor G00 ignore OFF ✩
M216 Load monitor G00 ignore ON ✩
M217
M218 Additional air blower OFF ✩
M219 Additional air blower ON ✩
M220 Flat turning OFF ✩
M221 Flat turning ON (1 : 1) ✩
M222 Flat turning ON (1 : 2) ✩
M223 Flat turning ON (1 : 3) ✩
M224 Flat turning ON (1 : 4) ✩
M225 Flat turning ON (1 : 5) ✩
M226 Flat turning ON (1 : 6) ✩
M227 LR15M-ATC; ATC operation completion waiting command ✩
M228 ATC next tool return command ✩
M229 ATC M-tool spindle orientation ✩
M230 External M signal ✩
M231 External M signal ✩
M232 External M signal ✩
M233 External M signal ✩
M234 External M signal ✩
M235 External M signal ✩
M236 External M signal ✩
M237 External M signal ✩
M238 M-spindle phase variation
M239 Sub spindle orientation ✩
M240 M-tool spindle: Neutral ✩
M241 M-tool spindle: 1st range ✩
M242 M-tool spindle: 2nd range ✩
M243 Chip conveyor stop ✩
M244 Chip conveyor forward rotation ✩
M245
M246 Pick-off interlock ON ✩
M247 Pick-off interlock OFF ✩
M248 Pick-off close ✩
M249 Pick-off open ✩
M250 Work pusher retract ✩
M Code Contents
To Next Page
Loading...