EasyManuals Logo

Oldsmobile Cutlass 1978 Series User Manual

Oldsmobile Cutlass 1978 Series
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
OPERATING TIPS:
Clear snow and ice from hood and air
inlet in front of
the
windshield. This
helps the . heater and defroster work
better and lowers the chance of fogging
on
the inside
of
the
windshield.
For
better driver vision, clear the wind-
shield, rear window, outside mirrors and
aU
side windows
of
ice and snow before
driving.
Run the blower on
"HI"
for a
few
seconds before driving off. This helps
clear the intake ducts
of
snow and
. further lessens
the
chance.
of
fogging · on
the inside
of
the windshield.
TO CONTROL THE BLOWER- Forced
air for heating or defrosting may be
obtained
by
moving upward the blower
switch located
to
the
left
of
the
sliding
lever controls.
The
first position
is
low
speed,
the
second position
is
medium and
the
top
position
is
high. For maximwn
heat in the rear seat area, put the blower
on
"HI,"
move the air control
to
"HEATER" and
the
temperature control
to
the extreme right. Close the windows
and make certain the space under the front
seat
is
clear
of
any obstructions.
32
TO TURN THE SYSTEM OFF -Move the
air lever to
"OFF"
and move the blower
switch
to
"LO".
HEATER/AIR
CONDITIONER
The heater and defroster controls of this
optional system are combined with
the
air
conditioner controls in a panel located
to
the right
of
the steering column.
CONTROLS-The
blower switch and
sliding lever controls provide desired
temperature comfort at your fingertips.
DASH
OUTLETS-The air outlets on the
instrument panel can be adjusted for
desired air flow and direction. This is done
by
rotating the deflector vanes and/or
registers. The vanes can be moved
to
a
closed position
to
shut
off
the air flow.
FOR COOLING-Move
the
top
lever
to
any
of
the
three "AIR COND" positions,
"MAX", "NORM" and "BI·LEVEL",
adjust
the
bottom
(temperature) lever
to
the desired air temperature and adjust
the
blower
switch
to
meet air flow
requirements. For maxirnwn cooling or
quick
cool-down in
hot,
humid climates,
move the
top
lever
to
"MAX". This
provides
80% recirculated air and 20%
outside air.
Moving
the
top
lever
to
''NORM'' provides 100% outside air and
www.PlandeGraissage.org

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oldsmobile Cutlass 1978 Series and is the answer not in the manual?

Oldsmobile Cutlass 1978 Series Specifications

General IconGeneral
BrandOldsmobile
ModelCutlass 1978 Series
CategoryAutomobile
LanguageEnglish

Related product manuals