4
Press and select a setting
item (see below), then press the
OK button.
● Setting Items:
(Daylight),
(Overcast),
(Tungsten Light) or
(Fluorescent).
● If the OK button is pressed again,
the setting is stored and the Menu
screen disappears. The normal
screen comes back on.
● When any setting except Auto is
selected, "WB" appears in the
control panel.
133
7
Manual White Balance Mark
4
4
● Set to Auto for most shooting conditions.
● Under certain lighting conditions, Auto may not be suitable.
● When ALL RESET is off (p.148), current settings are retained even when
the power is turned off.
● Make sure you check the color with the image displayed.
Note:
AUTO
[
1 / 5
]
F2.8 1/800 0.0
P
[
SM
]
PRE-SET
Control panel
To Next Page
Loading...
