Olympus CAMEDIA E-100RS - Selecting the Card

44
1
Selecting the card
Select the card you are using on the menu.
1
Set the Power switch to ON.
2
Press (Menu button).
● The menu is displayed in the
viewfinder when the Mode dial is
set to the Record mode. The menu
can be displayed on the monitor by
pressing (Monitor button).
3
Press on the Arrow pad to
select SM/CF, then press .
4
To use SmartMedia, select SM. To
use CompactFlash, select CF.
Press the OK button.
● Press the OK button again to save
the setting and restore the normal
screen.
..
Changing the card type without
going through the menu:
While pressing down the INFO button,
press the button. The card type is
changed.
SM
CF
[
1 / 5
]
F2.8 1/800 0.0 P
SM/CF
WB
[
SM
]
PRE-CAPTURE
3, 4
2
4
1
Still picture record menu
Control panel
Card
button
INFO button