6
114
Shooting with an external flash (Cont.)
See steps 1 and 2 in Taking pictures using both the main flash and the FL-40
external flash (P.112)
3
Make sure that the main flash is
closed. If it opens at any time
during shooting, close it.
4
Press (Flash mode button) to
display the available modes on the
control panel. Modes will be
displayed in the following order:
Auto-Flash (no display), Red-Eye
Reduction Flash , Fill-in Flash
, Flash off .
3
4
When using both the FL-40 external flash and the main flash
● If close-up pictures are overexposed, try using the main flash by itself.
● When the main flash and the FL-40 are used together, the main flash is
used as the compensating light source. This means that if the amount of
light from the FL-40 is insufficient (beyond its working range), the resulting
pictures may be underexposed.
Note:
Taking pictures using the FL-40 external flash by itself
To Next Page
Loading...
