61
2
● NEVER open the card cover, eject the card, remove the batteries, or pull
the plug when the card access lamp is blinking. Doing so could destroy
stored pictures and prevent storage of pictures you have just taken.
● The camera will enter sleep mode if no operations are performed during a
1-minute period. The camera will activate again as soon as you touch any
switch or button. You can adjust the sleep mode time.(P.159) Please turn
the camera off when you are not planning to use it.
Note:
How to use the viewfinder/monitor
1
Press to switch the display to
the monitor.
● When the power is turned on in the
Display mode , the monitor
turns on.
● Is the power on?
● Has the lens cap been removed?
● Is the camera in the sleep mode?
● Is the monitor turned on with the mode?
If nothing appears on the viewfinder:
(Monitor button)
To Next Page
Loading...
