95
4
1
Press to display “ ” on the
control panel.
● To cancel the Macro mode, press
the Macro button repeatedly until
the “ ” goes off on the control
panel.
2
Take a picture.
Taking close-up pictures—Macro mode
● When you use the flash in the Macro mode, the flash may not have the
proper effect. Confirm the result on the display.
● Unless OFF is selected in “All Reset”, the setting will be canceled and reset
to off when the power is turned off. (p.148)
Note:
Use the Macro mode to shoot subjects at close range. You can get as close
as 4 inches to your subject (when the zoom lever is set to “W” to the
maximum position), allowing you to fill the entire frame with your subject.
● Each time you press , “ ” goes on and off.
Control panel
Macro mode
Mode/Control panel Shooting range
No Macro (No indication) Approx. 23.6" to ∞ (factory preset)
Macro ( ) Approx. 3.9" to 23.6"
Macro mode shooting range when using the Zoom lever
WIDE (W) TELE (T)
Macro mode: 3.9" to 23.6" Macro mode: 3.25 ft to 6.5 ft
No Macro mode: 23.6" to ∞ No macro mode: 6.5 ft to ∞
21
To Next Page
Loading...
