4
Press to select YES.
● If you want to cancel formatting,
select NO.
5
Press the OK button to start the
formatting process.
● Card formatting starts when the
card-access lamp blinks.
● The menu disappears when
formatting is complete.
8
156
4
5
Confirmation screen
● All existing data stored on the card will be erased when the card is
formatted. Make sure that you save or transfer important data before
formatting a used card.
● Recording time may be higher with non-Olympus cards, PC-formatted
cards, and used cards. In such cases, re-formatting with the camera is
recommended.
● Cards with a write-protect seal attached cannot be formatted.
Note:
Initializing a card—CARD SETUP (Cont.)
To Next Page
Loading...
