10
186
Selecting the file numbering system
—FILE NAME (Cont.)
1
Display the mode setting screen.
[ See "How to use the Mode
Setting Menu Screen 1 – 3" (P.145)
2
Press on the Arrow pad to
select "FILE NAME", then press
.
3
Press to select "AUTO" or
"RESET", then press the OK but-
ton to confirm the setting.
4
Press the OK button repeatedly
until the menu disappears.
● When a card is used with a first file number larger than the last one in the
previous card, file numbers will continue from the larger number.
● When the maximum file number (9999) of the maximum folder number
(999) is reached, the number of storable pictures becomes 0, even if the
card is not full yet. No more pictures can be taken.
● Settings will remain until you change them.
Note:
LOW
RESET
1MIN
ON
OFF
[
2 / 3
]
SLEEP
[
SM
]
AF ILLUMNATOR
REC VIEW
FILE NAME
Still picture recording mode setting menu
RESET
AUTO
[
2 / 3
]
SLEEP
[
SM
]
AF ILLUMNATOR
REC VIEW
FILE NAME
2, 3
3, 4
To Next Page
Loading...
