Olympus VISERA CLV-S40 - Videoscope Compatibility; Connecting to a Fiberscope (Rigid Type)

Chapter 3 Installation and Connection
25
VISERA XENON LIGHT SOURCE CLV-S40
The following videoscopes are compatible with the high
intensity mode:
LTF TYPE V/V2/V3
A4941A/43A
A4801A/03A/05A
A50001A/03A/21A/23A
 Connection to a fiberscope (with rigid endoscope type
light guide connector)
Insert the light guide connector into the output connector on the front panel of the
light source until it stops (see Figure 3.9).
Figure 3.9
The following fiberscopes are compatible with the high
intensity mode:
CHF TYPE CB30L/S
URF TYPE P3