4
FromtheOmnia.9Homescreen,selectSystem,thenI/OOptions,thenInputOptions.
Each of Omnia.9’s three configurable internal inputs can be fed from any of the physical
rearpanelinputsbyusingthedropdownmenusforeachInputSourceasappropriatefor
yourinstallation.
Inturn,eachprocessingcoreisfedfromoneofOmnia.9’sthreeinternalinputsources.The
FM,HD1,Stream1,andStudioprocessingcoresarefedfromInput1.HD2andStream2
arefedfromInput2,whileHD3andStream3arefedfromInput3.
Connecttheaudiooutputsasappropriateforyourinstallation.Omnia.9supportsbalanced
professionallinelevelanalogaudiooutputsviaitsLeftandRightOutputsintheMainAnalog
I/Osectionoftherearpanel,twoAES/EBUdigitaloutputsonstandardXLRconnectorsinthe
MainDigitalI/Osection,anadditionaldigitaloutputintheAuxDigitalI/Osection,andtwo
compositeMPXoutputsintheCompositeI/Osection.
Return to the I/O Options menu, then select Output Options. Dropdown menus are
providedtoassigntheoutputsandsetthelevelsoftheMainFMOut1,MainFMOut2,Aux
Out, and Analog Out jacks on the rear panel. Output audio choices include FM Pre
emphasized L/R,FMDeemphasizedL/R, HD1, HD2, HD3, Headphone Out,and Speaker
Out.
AcompleteexplanationofthesecontrolscanbefoundintheSystemMenusectionofthe
HomeMenu.
Note:FMDeemphasizedL/Rissuitableformonitoringonly.Feedingtoastereogeneratorwhich
provides preemphasis will work, but it WILL cause overshoots and you WILL lose loudness. The
Omnia.9 should be the ONLY device providing the FM PreEmphasis. Any preemphasis in the FM
Exciter/Transmittershouldbedefeated.