4 - 5
4 Drive Programming Editor
Drive Programming User’s Manual (I580-E2)
4-1 Starting Drive Programming Editor
4
There are three ways to display the Drive Programming Editor:
• Double click the [Drive Programming] in the workspace.
• Click button on the CX-Drive toolbar.
• From the [Drive] Menu, select [Program] - [Program Editor].
To start the Drive Programming Editor for the first time after you started the CX-Drive, a pass-
word is required.
Please contact with your sales representative to request the access code, and enter it in the fol-
lowing dialog box.
Starting Drive Programming Editor
To Next Page
Loading...
