xiii
• Functions Supported for Unit Version 2.0 or Later
CX-Programmer 4.0 or higher must be used to enable using the functions
added for unit version 2.0.
CS1-H CPU Units
Function CS1-H CPU Units
(CS1@-CPU@@H)
Unit version 2.0 or later Other unit versions
Downloading and Uploading Individual Tasks OK ---
Improved Read Protection Using Passwords OK ---
Write Protection from FINS Commands Sent to CPU
Units via Networks
OK ---
Online Network Connections without I/O Tables OK ---
Communications through a Maximum of 8 Network Lev-
els
OK ---
Connecting Online to PLCs via NS-series PTs OK OK from lot number 030201
Setting First Slot Words OK for up to 64 groups OK for up to 8 groups
Automatic Transfers at Power ON without a Parameter
File
OK ---
Automatic Detection of I/O Allocation Method for Auto-
matic Transfer at Power ON
--- ---
Operation Start/End Times OK ---
New Application
Instructions
MILH, MILR, MILC OK ---
=DT, <>DT, <DT, <=DT, >DT, >=DT OK ---
BCMP2 OK ---
GRY OK OK from lot number 030201
TPO OK ---
DSW, TKY, HKY, MTR, 7SEG OK ---
EXPLT, EGATR, ESATR, ECHRD,
ECHWR
OK ---
Reading/Writing CPU Bus Units
with IORD/IOWR
OK OK from lot number 030418
PRV2 --- ---
To Next Page
Loading...
